Waterproofing Chemical And Coating

Product Details:

• Elastomeric, liquid applied crack bridging, 2-pack acryliccementitious waterproofing coating system 

Additional Information:

• Production Capacity: 1000 pks
• Delivery Time: immediate
• Packaging Details: 50 Kg Bucket + bag

Product Details:

For Waterproofing 

Brushbond RFX is a two component acrylic polymer modified cementitious coating which consists of Brushbond RFX powder and Nitobond BBX acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating.

Brushbond RFX can simply be applied by stiff brush, roller or trowel to obtain the desired thickness.

Additional Information:

• Production Capacity: 1000 Pks
• Delivery Time: Immediate
• Packaging Details: Bag and can

Product Details:

• Conplast WL is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly.
• Conplast WL waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder waterproofers as its use results in two fold improvement of concrete or mortar.

Product Details:

• Dr Fixit Pidicrete URP  Waterproofing Chemicals is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete - floors, columns, beams, chhajas, slabs. Waterproofing of toilets & bathrooms, small terraces etc. It bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.

• For concrete repairs - Spalled concrete of floors, columns, beams, chhajas, slabs, parapets, etc.
• For waterproofing - Small roof terraces, sunken portions of toilets & bathrooms, chhajas & lift pits, balconies & staircases.
• For waterproofing - Liquid & effluent tanks, car decks & walkways.
• As a bonding agent - Bonding mortar for tiles & panels, as undercoat for special finishes such as top rendering coat for chemical resistant floors.
• As a bond coat - For bonding of new concrete to old concrete, masonry stone work, plastering.
• For cladding - Fixing or re-fixing of slip bricks, tiles, stones & marble bedding.
• As external rendering - Weatherproof & frost resistant render, high wear & erosion resistant render. As bonding slurry coat for pinhole treatment on concrete surface & as repair mortar for overhead application.

Additional Information:

• Production Capacity: 2000 Ltr
• Delivery Time: Immediate
• Packaging Details: 20 Ltr

Product Details:

• Hydroproof is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane.

Product Details:

• Anticorrosive - protects from future corrosion 
• High adhesion - excellent bonding to all types of steel substrate
• Cement based - compatible with concrete
• User friendly - can be easily applied by brush

Product Details:

• Nitocote Wall Guard is water based polymer coating composed of high quality acrylic polymer, with weather resistant pigments, properly selected & graded fine fillers. It is used as a waterproofing & decorative coating for protection of exterior walls of the buildings from heavy wind driven rain.

Product Details:

• SikaTop® Seal-107 is a two part acrylic polymer modified cementitious liquid applied waterproof coating system.  

Product Details:

• Brushbond TGP crystalline capillary waterproofing system contains proprietary blend of portland cement, quartz aggregate and special chemicals. In the presence of moisture, the active chemicals in Brushbond TGP* crystalline waterproofing system penetrates concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces porosity by blocking capillaries and filling hairline non structural cracks ( upto 0.25mm wide) caused by shrinkage or expansion. Unlike metallic and membrane types of waterproofing which only form a surface barrier, Brushbond TGP* crystalline waterproofing system, in the presence of water, continues producing crystals and lasting imperviousness to water

Additional Information:

• Production Capacity: 10000 kG
• Delivery Time: Immediate
• Packaging Details: 15 Kg

Product Details:

Additional Information:

• Production Capacity: 10000 kg
• Delivery Time: immediate
• Packaging Details: 20 Kg

Product Details:

Product Details:

• Nitobond SBR(Latex) is modified styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.

Product Details:

• Withstands high positive and negative hydrostatic pressures
• Excellent crack accommodation before and after immersion
• Approved for use in contact with potable water
• Excellent bond to concrete and masonry
• Long working life
• Easy application by brush, trowel or spray 
• Bonds to green or damp concrete

Product Details:

Additional Information:

• Production Capacity: 1000 Pks
• Delivery Time: Immediate
• Packaging Details: 5 kg bag