Fischer Fis V Injection Mortar

Product Details:

• The fischer injection mortar FIS EM 585 S is a high-quality epoxy resin mortar for maximum load-bearing capacity in cracked and non-cracked concrete. Alongside the injection mortar, the injection system consists of reinforcement steel, the approved components anchor rod FIS A and internal threaded anchor RG M I. The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as top concrete jointers, high racks, or heavy-duty steel constructions.

• Approval for post-production rebar connections.
• Approval for cracked concrete, including seismic loads.
• Installation in water-filled drill holes.
• Fixing in hammer-drilled or diamond-drilled drill holes.
• No drill hole cleaning is required when using hollow drills. This saves time.

• The optimised formulation of the epoxy mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
• The ETA assessment guarantees a service life of 100 years. The IEA expert report even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
• The mortar can be used for rebar connections from diameter 8 to 40 mm.
• With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.
• Temporary and detachable fixing points are possible with the internal threaded anchor RG M I.
• For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5° C.
• The mortar is approved for diamond-drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2 and thus offers safety under extreme conditions.

Additional Information:

• Production Capacity: 10000
• Delivery Time: IMMEDIATE
• Packaging Details: 585ML

Product Details:

• Suitable for non-cracked concrete.
• High-performance hybrid resin for high loads in almost all building materials.
• The Hybrid mortar gives a good combination of organic resin (high bond strength) and mineral cement (avoids corrosion and gives high compressive strength).
• Expansion stress free anchoring guarantees a save use with small spacing and edge distances. Diff erent mortar versions and a large range of accessories gives the opportunity for diff erent applications and a wide temperature range of the anchor base.
•  Variable embedment depth enables the application in all kind of building structures. 
• The resin seals the drill hole and avoids penetration of dampness and gives therefore corrosion protection for the embedded steel. 
• FIS VS mortar version with longer maximum processing time and lower application pressure.
• FIS VW mortar version with accelerated curing especially during winter.

Additional Information:

• Production Capacity: 1000
• Delivery Time: Immediate
• Packaging Details: 360ml pk